GMC/Chevrolet C50, C60, and C70
Front Suspension Parts
Key No. |
Part Number |
Description | No. Req. |
OEM Number |
Remarks |
---|---|---|---|---|---|
1 | N/A | Hanger, Front Inner 1975-89 2nd Design |
2 | 2042102 | w/F050, F055 Axles |
1 | N/A | Hanger, Front Outer 1975-89 2nd Design |
2 | 2040953 | w/F050, F055 Axles |
1 | N/A | Hanger, Front Inner 1975-89 2nd Design |
2 | 2044360 | w/F070, F090, and F120 Axles |
1 | N/A | Hanger, Front Outer 1975-89 2nd Design |
2 | 2040956 | w/F070, F090, and F120 Axles |
2 | 327184 | Bolt, 15-16"-16 x 5-1/2" L | 2 | 688898 | |
2 | 334798 | Bolt Assembly 3/4"-16 x 4" L |
2 | 9418882 | Includes Bolt and Hardware |
3 | N/A | Washer 0.812" x 1-3/8" x 0.100" |
4 | 2436168 | Use SUW34 |
3 | N/A | Washer 0.960" x 1-1/2" x 0.130" |
4 | 3865187 | Use SUW100 |
4 | 334418 | Nut, 15/16"-16 | 2 | 644536 | |
5 | RB90 | Bushing 3/4" ID x 2" OD x 2-1/2" L |
2 | 3865740 | Offset Inner Sleeve |
5 | RB73 | Bushing 15/16" ID x 1-11/16" OD x 3" L |
2 | 3818490 | |
5 | RB94 | Bushing 15/16" ID x 1-7/8" OD 2-1/4" Oval x 3" L |
2 | 3865746 | |
6 | N/A | Hanger, Rear 1975-1989 | 2 | 2042161 | w/F050, F055 Axles |
6 | N/A | Hanger, Rear 1973-1978, 65 Series Only |
2 | 3888496 | F070, F090, F120 Axles |
6 | N/A | Hanger, Rear 1975-1989 | 2 | 2040847 | F070, F090, F120 Axles |
7 | 334768 | Bolt Assembly, 5/8"-18 x 4-1/2" |
2 | 955375 | |
7 | 334770 | Bolt Assembly, 5/8"-18 x 5" |
2 | 23-09444-500 | |
8 | N/A | Rebound Spacer | 2 | 3850328 | With 2-1/2" Springs |
8 | N/A | Rebound Spacer | 2 | 3865601 | With 3" Springs |
9 | 334732 | Cushion/Retainer Assembly | 2 | 3865198 3865199 |
With 2-1/2" Springs |
9 | 334733 | Cushion/Retainer Assembly | 2 | 2073778 | With 3" Springs |
10 | 361368 | U-Bolt Kit; Square Bend, Grade 5 |
4 | 2066295 | 9/16" x 2-9/16" x 7-5/8", Square Bend, Includes nuts and washers |
10 | 361370 | U-Bolt Kit; Square Bend, Grade 8 |
4 | 2416103 | 5/8" x 3" x 8-3/8", Square Bend, Includes nuts and washers |
10 | 361372 | U-Bolt Kit; Special Bend, Grade 8 |
4 | 3894052 | 3/4" x 3" x 9-3/8", CR2 Bend, Includes nuts and washers |